Würth RW 1010 Traduction Des Instructions De Service D'origine page 10

Start/stop stirring only when the device is in
■
the stirring vessel. Ensure the stirring vessel
stands firmly and securely.
Wait until the device/tool has come to a
■
standstill. Rotating tools can get caught and as
a result cause injuries or damage.
Protect yourself with a dust mask against haz-
■
ardous dusts generated during stirring. Some
kinds of mineral substances are considered to
be carcinogenic. Use a dust extraction device
where possible.
Neither insert tools nor reach into the stirring
■
vessel while stirring! Risk of crushing!
Item
Capacity rating
Voltage
Frequency
Idle speed, 1st gear
Idle speed, 2nd gear
Speed under load, 1st gear
Speed under load, 2nd gear
Maximum diameter of the mixer
Maximum mixing quantity
Weight without stirring attachment
Protection class
The device is intended to stir liquid and powdery material, such as paint, mortar, adhesives, plaster and
similar substances.
Select a stirring attachment that suits the consistency and amount of the material to be stirred.
The device is not designed for continuous operation.
On account of the high torque values, it is forbidden to use this device as drill.
The tool must not be used for stirring food.
The device is suitable for material containing graphite dust, brines or liquid manure. Stirring these substances
can destroy your device.
The user is liable for damage resulting from improper use.
10
Safety instructions
■
■
Technical Specifications
0702 841 X
1010 W
230-240 V AC
50/60 Hz
-925 min
-680
120 mm
40 l
4,7 kg
Proper use
As a matter of principle, connect the device
only to a residual current device (RCD) with
an operating current of 30 mA or less.
Only use genuine Würth accessories
and spare parts.
-1
rpm
/ II
0702 846 X
1400 W
230-240 V AC
50/60 Hz
-660 min
-1
-920 min
-1
-440 min
-1
-610 min
-1
160 mm
90 l
5,6 kg
/ II