Anslut 018229 Mode D'emploi page 22

EN
USE
CHARGING
1. Connect USB charger to the power supply.
2. Connect charger cord to micro USB port.
3. The battery charge status is shown on the
battery indicator. When all 4 status lights go on
the battery is fully charged.
NOTE:
Fully charge the batteries before using for the first
time.
POWER SWITCH FUNCTION
First press
Second press
Third press
If the switch is not touched for 3 seconds the next
time it is pressed will switch it off.
22
Main spotlight COB LED goes on
Secondary spotlight LED goes on
Spotlights go off