FUXTEC FX-WB Mode D'emploi Original page 20

Original Manual 5in1 Workbench FX-WB de_en_fr_ita_rev1
3) Put the connector into Sawhorse hole on the workbench surface and rotate at
least 30 degrees (Fig 4);
4) With the help of the 2 vice pegs on the workbench, a sawhorse is completed.
NOTE: DO NOT step on the workbench while the legs are extended.
MAINTENANCE
⚫
Maintain your workbench. It is recommended that the general condition of any
workbench be examined before it is used. Keep your workbench in good repair
by adopting a program of conscientious repair and maintenance. Have
necessary repairs made by qualified service personnel.
⚫
Wipe away dirt and dust from the workbench on a regular basis.
20