RF Avtek Mode D'emploi page 5

IV. Operate Instruction
Note: delay 500MS when change up/down direction, the longest running time is 4min once.
Program setting state
When the power is on, press the setting button (KEY), the receiver enter the program setting state.
(The receiver will return to the original state if no operation is done after 10 seconds)
Program setting
Press the "UP" button or setting button (KEY) to set program when the receiver enter the program.
Setting state, the program set successfully, return the original state, (the receiver can stores 20 channels, the 21th command
will cover the 20th command)
Delete one of the channel's memory
When the receiver and transmitter all enter the program setting state,(the transmitter with multiple channels want to delete the
channel, operate the next step), choose the channel which you want to delete on transmitter, press the "DOWN", delete one of
the channel's memory successfully, return to the originate state automatically.
Change Direction
When the receiver and transmitter all enter the program setting state, choose the transmitter which had set program, press
"STOP", the direction change successfully, return to the original state automatically.
Delete all the channel's memory
When the receiver enter the program setting state, press the setting button (KEY) again, delete all the channels' memory, (all
the program setting of the receiver all deleted) return to the original state automatically.
Button (KEY) of transmitter (RF) for function control
Press "UP", the motor is up
Press "STOP", the motor stop running
Press "DOWN", the motor is down
V. Troubles
No. Troubles & problems
When operate, the LED light of emitter is on, but the
1.
receiver cannot operate accordingly.
The LED light of the emitter is off or weak
2.
The LED light of the emitter and receiver work well, but
3.
the motor does not work.
Check Items
Please check the connection and the receiver or check
the program setting.
Please check enough power supply (check if the
installation is right when change the battery)
Please check the connection of the motor if the motor
destroy.
5