Buffalo CW147 Mode D'emploi page 4

UK
Operation
Control panel
The control panel is located at the rear of the appliance.
On/off switch
Turn On
1. Close the doors of the appliance.
2. Ensure the on/off switch is set to O and connect the appliance to a mains power supply.
3. Set the on/off switch to I.
4. Setting the temperature: Rotate the thermostat to desired temperature (Range: 30°C - 90°C).
5. The indicator light turns on when heating up. When the set temperature is reached, the indicator light
goes out.
6. The appliance is now ready for food to be displayed and kept warm.
Cleaning, Care & Maintenance
Switch off and disconnect the appliance from the power supply. Allow to cool
down before cleaning.
• Remove any food debris that is present in the appliance after use.
• Remove the GN pans. Wipe the pan holder underneath to remove any water.
• Clean the interior of the appliance as often as possible.
• Use warm, soapy water and a damp cloth to clean the appliance.
• Do not use abrasive cleaning agents. These can leave harmful residues.
• Always wipe dry after cleaning.
4
CW147-CW148_ML_A5_v2_20181205.indb 4
Indicator light Thermostat
2018/12/5 17:17