Mi G9 Manuel D'utilisation page 8

Care & Maintenance
3. Push the dust compartment release switch in the direction
indicated by the arrow, then gently remove the dust compartment
from the vacuum cleaner.
2
1
Dust Compartment Release Switch
12
4. Remove the pre-filter first, then lift the handle of the cyclone
assembly and turn to counterclockwise until it stops, then pull to
lift out the cyclone assembly.
1
Pre-filter
2
5. Rinse the pre-filter, cyclone assembly, and dust compartment
with water until they are clean, then set each component aside to
thoroughly dry for at least 24 hours.
Pre-filter Cyclone Assembly Dust Compartment
Notes:
The dust compartment should be rinsed out at least once a
month.
The pre-filter and cyclone assembly should be cleaned once
every 3 to 4 months.
6. Wipe the contact points of the vacuum cleaner with a soft dry
cloth if they are dirty.
Notes:
Do not use detergents, polishes, or air fresheners to clean the
dust compartment.
Do not clean the dust compartment, pre-filter, or cyclone
assembly in a dishwasher or washing machine, nor attempt to
dry any component in a tumble dryer, oven, microwave, or near
an open fire.
13