Mi G9 Manuel D'utilisation page 10

Care & Maintenance
4. Allow the HEPA filter to thoroughly dry for at least 24 hours.
Installing the HEPA Filter
1. Insert the HEPA filter into the vacuum cleaner and gently press
down, as illustrated.
16
2. Reinstall the dust compartment.
1
Insert until it
2
clicks into place
Cleaning the High Torque Brush Bar
1. Turn the lock counterclockwise until it stops, then remove
the roller brush from the high torque brush bar.
2. Use scissors to cut and pick out any hair or other debris tangled
around the roller brush. Wipe away excess dust from the slot and
clear plastic cover using a dry cloth or paper towel.
3. After extended use, the roller brush may become dirty and
should be washed.
4. After washing, allow the roller brush to dry thoroughly by
standing it upright in a well-ventilated area for at least 24 hours.
17