Child Lock; Erase Mode - Petporte Smart flap Guide D'utilisateur

Operating Modes (continued)
Extended Modes (continued):
To enter the Extended Modes menu, press both the Red and Green Buttons for 2
seconds, or until both lights begin to flash, and then release them. The Smart Flap
should beep and the green light will come on to inform you that you have now
entered the Extended Mode menu.
For information on how to use the Extended Modes please see the Extended Modes
section on page 12 of this user guide.
If no buttons are pressed within a 20 second period, the Smart Flap will beep and
the green light will extinguish, indicating that the unit has gone back to its normal
mode of operation

Child Lock

If you wish to lock the buttons on your Smart Flap (preventing children from adjust-
ing the modes!), press and hold the Red Button for 30 seconds. The unit should begin
to beep repeatedly. Release the Red Button and the unit will now be set to Child
Lock.
To re-enable the button controls and disable the Child Lock, repeat the above
process.

Erase Mode:

If you wish to erase all programmed animal identification numbers from the
system's memory, please use the following procedure. However, it must be noted
that once the memory has been erased, you will have to re-program the unit with
any animals that are to use the cat flap. Therefore, please ensure that you really
wish to erase the memory before proceeding.
cont. over page
operating modes 11