Maintenance; Trouble Shooting - Dexter 3.6VSD2.5 Traduction Des Instructions D'origine

FR
ES
.
The forward/reverse switch is used to reverse the rotational direction of the tool. Change the direction of rotation only when the machine is not in
PT
operation !
IT
EL
Push the forward/reverse switch from right to the stop(for screwing-in screws)
Push the forward/reverse switch from left to the stop(loosening or unscrewing screws).)
PL
UA
CAUTION: Please support and clamp the workpiece properly. Do not use hand to grip or clamp the workpiece, it may cause injury.
RO
EN

9. MAINTENANCE

The cordless screwdriver is designed for using and charging in temperature regions with a characteristic temperature of 0 ° C to 45 ° C,
relative humidity not more than 80%,the absence of direct exposure to atmospheric pre capitation and excessive dust content of the air.
Do not use power tools in explosive areas where ammable liquids, gases, dust are present. It creates sparks, which can lead to the ignition of dust,
steam.
Shelf life - 4 years provided that the products are stored indoors with natural ventilation in the package at an air temperature of --20 ° C to 40 ° C
and a relative humidity of not more than 80%

10.TROUBLE SHOOTING

Problem
The machine stops working
after rotating slowly.
Can't turn or tighten the
screws
Abnormal sound of gear
box.
Forward/reverse switch
Application area
Requirements for room conditions
Storage conditions
Possible Causes
The battery is in low power.
The size of the screw is inappropriate.
The gear box is damaged.
Likely solutions
Need to charge the machine before operating.
Please follow the instructions to use the correct
screw.
Replace the gear box