Olympia CB729 Mode D'emploi page 4

UK
Fitting/Removing the Heating Plate
1. Disconnect the appliance from the power supply and
allow to cool.
WARNING: Failure to allow the appliance
to cool could result in burns!
2. Remove the inner bowl.
3. Lift the lid/outer pan section from the frame and place
gently on its side.
4. Unscrew the four nuts securing the heating plate to
the underside of the appliance and remove the heating
plate.
5. Fitting is a reversal of the above procedure.
Troubleshooting
Fault
The unit is not working The unit is not switched on
Foodstuffs do not stay
warm
Technical Specifications
Model Voltage
CB729
230V~ 50Hz
CB730 230V~ 50Hz
GD128
230V~ 50Hz
4
CB729_CB730_GD128_ML_A5_v6_20210525.indb 4 CB729_CB730_GD128_ML_A5_v6_20210525.indb 4
Probable Cause
Plug or lead are damaged
Fuse in the plug has blown
Power supply
Heating plate has become loose
No water in outer pan
Lid not fully closed
Power Current
280W 0.8A
280W 0.8A
280W 0.8A
Solution
Check the unit is plugged in correctly and
switched on
Call OLYMPIA agent or qualified Technician
Replace the fuse
Check power supply
Disconnect from power supply. Allow
heating plate to cool and tighten nuts
Fill outer pan with HOT water no higher
than MAX level
Close lid
Capacity Weight
6 litres 10kg
6 litres 11kg
8 litres 13.5kg
Dimensions
H x W x D mm
237 x 420 x 470
237 x 404 x 419
240 x 460 x 590
2021/5/25 13:50 2021/5/25 13:50