Qlima EFE 2018 Manuel D'utilisation page 59

Remote control
Activate het stand-by mode. Press the on/off button on the remote control to activate the
light effect. The brightness can be changed with the 'Dimmer' button.
The two heating modes can be activated with the button '900W' and '1800W'.
The desired temperature can be set (15-30˚C ) with the + and - buttons. The standard set-
ting is 20˚C.
The timer function can be (on/off) set with the button 'Timer set".
The date and time can be set with the date/time button. The date can be set with the
arrow buttons. The hours and minutes can be set with the + and - buttons. Press the 'ok'
button after changing the date or time to confirm the settings.
There are ten settings possible for the timer function. Each setting has a date, 'on' time'
and 'off' time. The maximum time is 23hour and 50 minutes.
Press the Timer set button. Select the 'on' time with the + and - buttons. The 'off' time can
be selected with the 'arrow up' button. A set value can be deleted with the 'C' (Cancel)
button.
By pressing die IC (Intelligent Control) button the heating mode for the planned time
(timer function) can be activated, depending on the difference between the actual and
desired temperature. The heating mode can also be changed automatically when the cir-
cumstances give rise to such action. This is to reach the desired temperature in a timely
manner.
MAINTENANCE AND STORAGE
Wait for the product to cool down completely before service of storage.
Make sure the product is in the "O" OFF position and the het power cord is disconnected before
starting the cleaning activities.
• Make sure the housing of the appliance is fully intact and mounted before each use.
• Do not touch hot surfaces. Always use the handle of the appliance. Use protective gloves
to avoid serious burns or other injuries.
• Clean the exterior of the appliance with a soft, moist cloth.
WARNING:
Do not let water or other fluids enter the product, this can cause fire and / of an
electrical hazard.
• Do not us abrasives or solvents, these can damage the appliance.
• Store the product in a clean dry place when it is not being used.
4
59