HumanTechnik lisa soundmonitor Mode D'emploi page 15

Mounting the »soundmonitor«
The »soundmonitor« can be mounted
using the supplied wall mount. To use
it, fix the wall mount onto a wall (or
rafter, cupboard etc.) When mounting
onto a brick- or stone wall, you may
need a power drill and stone bit to do
so. Use the supplied wall plugs in this
case.
Once fixed, hang the »soundmonitor«
onto the wall mount bracket.
Maintenance and care
The »soundmonitor« does not require
any maintenance. If the unit does be-
come dirty, simply wipe it clean with
a soft, damp cloth. Never use spirits,
thinners or other organic solvents.
Do not set up the unit where it
will be exposed to full sunlight for
long periods. In addition it must be
protected against excessive heat,
moisture and severe mechanical
shock.
Note: This product is not protected
against splash water. Do not place
any containers filled with water, such
as flower vases, or anything with an
open flame, such as a lit candle, on
or near the product.
English 15