PLYMOVENT KUA-H/S/ATEX Manuel Opérateur page 11

0000101887/071013/A KUA/S
NoTe!
3. Fit hose, jubilee clips, hood collar and
hood to outer arm (Hose 400 mm).
2. Mount the flange on the filter and the
rubber collar on the inner arm.
Then mount the arm on the filter.
NoTe! The WASher!
4.Adjust all friction joints
to correct tension
5. Fit hoses and jubilee clips (Hose 650 mm).
KUA-S/ENG/7/10
EN - 10