USRobotics 56K USB Modem Guide D'installation Rapide page 7

Step Two: Install the Hardware
1. Use the provided telephone cord to connect
the phone jack on the modem to an analogue
telephone wall jack.
To connect a telephone to the same line as the
56K USB Modem for V.92 features such as
"Modem on Hold", you will need to use a tel-
ephone line splitter to connect your modem
and telephone to the same wall jack.
2. Insert the 56K USB Modem in to an
available USB port on your computer.
Step Three: Install the
Modem Driver
Windows Vista
You must be logged in as an administrator in order to install this modem.
1. When the Found New Hardware Wizard appears, select Locate and install
driver software (recommended).
2. If prompted for permission, click Continue.
3. If prompted, select Don't search online.
4. When prompted, insert the USRobotics Installation CD-ROM
into your CD-ROM drive.
Windows searches for the modem driver automatically.
OR
If prompted, click Next to instruct Windows to search for the
driver.
5. If prompted by Windows Security, click Install.
Windows installs the modem driver.
6. When installation is complete, click Close.
7. The PWR LED on the modem will light.
* USRobotics has thoroughly tested this driver in conjunction with the supported hardware
and has verified compatibility with Windows Vista, XP, and 2000.
U S R o
b o t ic
s
PW R
DA TA
U S R o
PW R
*
English
b o t ic
s
DA TA
3