Overview - Gallagher HR3 Notice D'installation

Overview

The Gallagher HR3 Hand Held EID Tag Reader is a Bluetooth enabled hand held Electronic ID
reader which allows the user to read and store ISO animal Electronic ID tags. The Gallagher
HR contains internal memory and internal rechargeable ba eries.
3
The Gallagher HR3 Reader has two modes of opera on:
• Memory Mode - The captured Electronic ID tag data is stored in the Reader in sessions
un l it is transferred to computer using the MyScale Pro so ware. (Electronic tag data
is also immediately sent out the serial port via cable, if connected, to a scale or data
logging device.)
• Non-Memory Mode - The captured Electronic ID tag data is immediately sent out the
Serial port (via Bluetooth or cable) to a Scale or data logging device.
Tag types read
The HR3 Reader enables you to read both HDX (Half Duplex) and FDX-B (Full Duplex-B)
Electronic ID tags.
Care and Maintenance
The Gallagher HR3 Hand Held EID Tag Reader is a tough and reliable product designed for
use in typical livestock environments. However, proper care and maintenance can extend
the Reader's life.
Listed below are guidelines for keeping the Reader in good condi on.
• For op mal ba ery life, Gallagher recommends that you store the Reader in a cool, dry
area (15 to 25 ° Celsius) out of direct sunlight.
5