AEG LM 1.5 Mode D'emploi page 33

No. designation
1 seLeCt button for selecting the voltage
▪
LM 1.5 Microprocessor Charger:
6 V / 1.5 a or 12 V / 1.5 a
▪
LM 4.0 Microprocessor Charger:
6 V / 2 a or 12 V / 4 a
▪
Ld 5.0 Microprocessor Charger:
6 V / 2 a or 12 V / 5 a
▪
Ld 7.0 Microprocessor Charger:
6 V / 3.5 a or 12 V / 7 a
2 Ld 5.0 and Ld 7.0 Microprocessor Charger only:
dispLaY button for switching the display (whilst charging, 5 seconds after
switching the display will automatically switch back to displaying the current battery
voltage)
V
a
%
3 Comfort plug connection
4 terminal connection cable (+) with clamp (red)
5 terminal connection cable (-) with clamp (black)
6 terminal connection cable (-) with ring lug (black)
7 terminal connection cable (+) with ring lug (red)
8 power cable with power plug
9 error red
10 Full (charged) green
11 Charge orange
12 power green
13 Mounting option
14 Battery connection cable with on-board outlet comfort connection (accessory, sold
separately)
Function
the red Led will light up next to 6 V
or 12 V
per the selection.
indicates the battery voltage.
indicates the charging current.
indicates the battery charging status in percent.
see "troubleshooting".
Lights up once the connected battery is fully charged.
Lights up during the charging process.
Lights up whilst the charger is connected to the 230 V
mains socket.
GB
33