Publicité
User Manual
Introduction
Thank you for purchasing the LINDY Fibre Optic HDMI 2.0 Hybrid Cable! This Cable allows you to transmit
HDMI signals up to a distance of 100m. This cable is a hybrid cable containing both fibre optic and copper
cores.
To extend signals over 100m we provide multiple solutions both with and without IR support and up to
3000m. Please go to www.lindy.com to view our extensive range.
Features
Suitable for use with computers, home theatres, video walls and professional equipment
Supports HDMI 2.0 full Specification with transmission data rates up to 18Gbps
Supports HDCP 1.4/2.2 pass through, Audio and CEC
Supports HDMI resolutions up to Ultra HD 4K (3840x2160) 60Hz, 4:4:4, including 1080p 3D
Supports colour depth up to 48 bit (16 bit per channel)
Supports EDID and HDCP bi-directional communication
Supports lossless HDMI audio formats like Dolby True HD and DTS-HD, etc.
Available in lengths from 10m to 100m (custom made lengths up to 150m)
Package Contents
LINDY HDMI Hybrid cable
Installation and Operation
The minimum bending radius of the hybrid cable is approximately 6cm (~2.5 inch), bending the cable
to a smaller radius will irreversibly destroy the cable.
Never step on the cable or put any heavy pressure on to the cable
The maximum pulling tensile load of the cable is 150N (15kg). Never pull the cable with higher load.
This cable can be used in only one direction. The connectors are labelled "TX" and "RX". Each
connector must be plugged in to the correct port to avoid display issues.
The HDMI connectors include electronic chipsets that convert the electrical signal to an optical signal
and back. The chipsets require ~250mA of power, because some HDMI sources are unable to provide
enough power for TX and RX, the RX connector is equipped with a USB A type male connector. Use an
available USB port that can supply up to 500mA @5VDC or a USB power supply with at least 250mA.
Please see the LINDY website for USB power supplies and cables.
Connect the cable to your devices before powering on your display and source to complete the
installation.
Compatibility Remark: During extensive tests we found a compatibility issue unique to the Xbox 1S due its weak
HDMI signal quality at 4K 60Hz 4:4:4. Unfortunately there is no solution to this issue until Microsoft improves the
output signal quality of the Xbox 1S.
This User Manual
English
Publicité
