Humini helps preventing dry air symptoms by humidifying the ambient air thanks
to a cold mist. An air humidifier is efficient against dried mucous membranes,
nose bleeds, rhinitis, eye irritation, dry skin, dry cough or nocturnal thirsts. In terms
of hygiene and comfort, Air&me recommends a relative humidity (hygrometry)
between 40 and 60%.
Operating instructions
Before starting Humini, check that
the product is unplugged and the front
button is on the «OFF» position.
• Place the humidifier on a flat surface,
at least 60 cm above the floor and 10
cm from the wall.
• Fill the tank (see instructions below).
• Plug the power cord in an electrical
socket.
Tank filling
•
Remove the tank (back part of the device).
•
Turn over the tank, unscrew the cover (follow the
"WATER" arrow) and fill the tank with cold water. Never
use hot water as it could create leakage.
•
Screw back the cover clockwise.
•
Replace the water tank on the device.
Controls
Humidification power
By touching the main button, you can adjust the humidification
power as you wish.
• Touch once: the appliance is ON, minimum power
• Touch twice: medium power
• Touch third: the appliance is OFF.
Caution: at maximum power, it is possible that the mist falls back
and creates condensation around the appliance which could
be wrongly identified as a leak. In order to avoid that, reduce
the power level and/or place the humidifier near a heat source,
on furniture at more than one meter height.
• Turn the appliance on using the front
button and select the desired power.
• The Humini humidifier automatically
turns off when the tank is empty.
9