Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
C
NOTE
•
When the child lock is activated, the child
lock warning indicator on the screen
turns on.
•
Child lock deactivates when the drying
machine is turned off and on by the On/
Off/Cancel knob.
When the child lock is active:
When the drying machine runs, or in stand-
by state, the indicator symbols won't change
upon changing the position of the programme
selection knob.
C
NOTE
•
When the drying machine runs and the
child lock is active, it beeps twice when
the programme selection knob is turned.
If the child lock is deactivated without
returning the programme selection knob
to its previous position, programme
will terminate due to the change in the
programme selection knob position.
5.9 Changing the programme after it
is started
You can change the programme you selected
to dry your laundry with a different programme
after the drying machine starts running
•
For instance, select Extra Dry programme
by turning the On/Off/Programme
selection knob to select Extra Dry instead
of Iron Dry.
•
Press the Start/Stand-by button to start
the programme.
Adding and removing clothes during
stand-by
If you want to add or remove clothes to/from
the drying machine after the drying programme
starts:
•
Press the Start/Stand-by button to put
the drying machine in Stand-by state. The
drying operation stops.
•
Open the loading door while in Stand-
by state, and close the door after you
remove or add laundry.
•
Press the Start/Stand-by button to start
the programme.
16
C
NOTE
•
Adding laundry after the drying operation
starts may cause the dried laundry inside the
machine to mix with wet laundry and leave
the laundry damp at the end of operation.
•
Adding or removing laundry during drying
may be repeated as many times as you
wish. But this operation continuously
interrupts the drying operation, and thus
increases programme duration and energy
consumption. So, it is recommended to add
laundry before the programme starts.
•
If a new programme is selected by turning
the programme selection knob while the
drying machine is in stand-by, the running
programme terminates.
WARNING!
•
Do not touch the inner surface of the
drum while adding or removing clothes
during a continuing programme. The
drum surface is hot.
5.10 Cancelling the programme
If you want to cancel the programme and
terminate the drying operation for any reason
after the drying machine starts running, turn the
On/Off/Cancel knob, the programme will be
cancelled.
A
WARNING!
•
The inside of the drying machine shall
be extremely hot when you cancel the
programme during machine operation, so
run the refresh programme to allow it to cool
down.
Dryer / User Manual
Publicité
Table des Matières
