Laundry Guide - KENMORE ELITE HE5t Steam 110.4778 Série Guide D'utilisation Et D'entretien

Wash Temp
Select a water temperature based on the type of load you are
washing. Use the warmest wash water safe for fabrics. Follow
garment label instructions.
The Steam Sanitize temperature provides an extra high
temperature to remove 99.9% of certain bacteria. It is
recommended that you set your hot water heater to 120ºF
(49ºC) to ensure proper performance during this cycle.
NSF Certified
The Steam Sanitize temperature uses high water
temperatures. Please check garment care label to avoid
garment damage.
Refer to this chart for suggested load types and their corresponding cycles. Listed to the right are the options available to each of these
washer cycles.
CYCLE SUGGESTED LOAD TYPE
Express Wash Small loads of 2-3 lightly soiled cotton,
polyester, nylon, and cotton blends.
Handwash/ Woolens with a felt-free finish and special-care
Wool items identified as machine washable.
Silk/Ultra Silk or Ultra Delicate fabrics identified as
Delicate machine washable.
Rinse & Spin All loads
Drain & Spin All loads
Clean Washer No clothes
Whitest Whites Soiled white fabrics
Heavy Duty Heavily soiled underwear, towels, shirts, etc.,
made of cotton
KidsWear Children's clothing or any fabric that requires
extra rinsing
Bulky/Bedding Normally soiled blankets and comforters
Normal/Casual Normally soiled blouses, shirts, overalls, etc.,
made of polyester, nylon, cotton, linen, or cotton
blends
In wash water temperatures colder than 60°F (15.6°C),
detergents do not dissolve well. Soils may be difficult to
remove.
Warm rinses leave the loads dryer than cold rinses. Warm rinses
increase wrinkling. In cold climates, a warm rinse makes the load
more comfortable to handle. Cold rinses save energy.
Auto Temp Control
ATC (Auto Temp Control) electronically senses and maintains a
uniform water temperature. ATC regulates incoming hot and cold
water. The ATC is automatically turned on when a cycle is
selected. (See "Preset Cycle Settings" in "Cycles.")
ATC works for the wash temperature with Steam Sanitize,
Hot, Warm, and Cool settings.
The Cold wash temperature depends on the cold water at
your faucet.
ATC works for the rinse temperature where the wash temp
setting is marked with an asterisk, such as Warm*. All other
rinse temperatures are cold.

Laundry Guide

Delay STEAM
Start TREAT™
AVAILABLE OPTIONS
TIMED Autosoak Save
OXI™ Energy
Plus
2nd Rinse/
Skincare
Rinse II
19