Henry Schein HS-XRV Manuel D'utilisation page 2

HS-XRV 30/38
Users manual for
GENERAL NOTES ............................................................................0
DESCRIPTION OF THE EQUIPMENT AND ITS USE......................1
TECHNICAL SPECIFICATIONS .......................................................1
IMPORTANT WARNINGS.................................................................1
INSTRUCTIONS FOR USE...............................................................1
MAINTENANCE ................................................................................1
GENERAL NOTES :
Please read this booklet carefully. It contains important information about safe installation, use and
maintenance. Keep this booklet in a convenient place for further reference.
(1) Check the general condition of the unit after removing the packaging. When in doubt do not
operate the unit and contact a qualified service repair person authorised by HENRY SCHEIN.
(2) Before connection, check to see that the identification plate indicates the correct voltage for the
electrical supply system. lnstallation must be carried out in compliance with all applicable safety
standards and in accordance with the manufacturer's instructions. The manufacturer will not be
held responsible for damage to objects and/or harm to people caused by improper installation.
The unit is safe only when connected correctly to ground via an appropriate device in accor-
dance with safety standards.
This fundamental requirement must be satisfied. If in doubt, request a thorough inspection of
the system by a professionally qualified technician.
The manufacturer will not be held responsible for damage caused by an improperly grounded system.
(3) This unit should only be used as intended by the manufacturer. Any other use must be consid-
ered inappropriate and consequently dangerous. The manufacturer will not be held responsible
for damage caused by improper, erroneous or unreasonable use.
Do not modify, change or put out of order any safety protection of the equipment. The user must
not attempt to carry out any repair unless authorized. Do not clean or repair the HS-XRV while
it is connected to an electrical system. Regularly check if the power cable is damaged.
When authorized technicians decide to replace spare parts, they must use original replacements
and moreover they must adhere to manufacturer's information and technical characteristics.
However use the HS-XRV in accordance with the general safety and accident prevention rules
of the country in which the equipment is installed.
X-Ray viewer
Table of Contents