Kenwood kMix BLX50 Série Mode D'emploi page 7

care and cleaning
Always switch off, unplug and dismantle before
●
cleaning.
Empty the goblet before unscrewing it from the blade
●
unit.
The goblet can be washed in your dishwasher.
●
power unit
Wipe with a damp cloth, then dry.
●
Don't immerse the power unit in water.
●
Wrap excess cord around the bottom of the power unit
●
.
blade assembly
1 Unscrew the base from the goblet in an anticlockwise
direction.
2 Remove the blade unit from out of the base by pushing
up from underneath.
Care should be taken when removing the
●
blade unit from the base.
3 Remove and wash the sealing ring.
4 Don't touch the sharp blades – brush them clean using
hot soapy water, then rinse thoroughly under the tap.
Don't immerse the blade unit in water.
5 Leave to dry upside down.
lid
Remove the lid by pushing the tab up
●
Unclip the seal before cleaning the lid
●
Wash both parts by hand, then dry.
●
other parts
Wash by hand, then dry.
service and customer care
If the cord is damaged it must, for safety reasons, be
●
replaced by KENWOOD or an authorised KENWOOD
repairer.
If you need help with:
using your appliance or
●
servicing, spare parts or repairs
●
Contact the shop where you bought your appliance.
IMPORTANT INFORMATION FOR CORRECT
DISPOSAL OF THE PRODUCT IN ACCORDANCE
WITH EC DIRECTIVE 2002/96/EC.
At the end of its working life, the product must not be
disposed of as urban waste.
It must be taken to a special local authority differentiated
waste collection centre or to a dealer providing this service.
Disposing of a household appliance separately avoids
possible negative consequences for the environment and
health deriving from inappropriate disposal and enables
the constituent materials to be recovered to obtain
significant savings in energy and resources. As a reminder
of the need to dispose of household appliances
separately, the product is marked with a crossed-out
wheeled dustbin.
.
.
4