Perel TC90400 Mode D'emploi page 5

8. Operation
8.1 Vacuuming Ashes
 Check if the device is assembled well before using it.
 To vacuum ashes, connect the hose to the suction connection.
 Insert the power plug into the mains socket.
 Switch on the device.
 Vacuum the cold ashes.
 Switch off the device.
 Unplug the device from the mains.
 Remove the cover from the ash collector.
 Throw away the ashes in an environmentally safe way.
Leave the ashes to completely cool down prior to vacuuming them!
8.2 Blow Function
This ash cleaner features a convenient blow function. This function allows you to blow away ashes and to move
them to places that are more accessible.
 Check if the device is assembled well before using it.
 To use this blow function, connect the hose to the blowing connection.
 Insert the power plug into the mains socket.
 Switch on the device.
 Switch off the device after use.
 Unplug the device from the mains.
9. Cleaning and Maintenance
 Always unplug the device before starting any cleaning and maintenance activity.
 Clean the filter frequently. The frequency depends of the type of ashes you vacuum. Types of ashes can
differ. For some types of ashes, you will need to clean the filter more often than for other types.
 Take off the filter and clean it with water. Let it dry afterwards. Do not use a dry cleaner of a hair dryer to
speed up the drying process of the filter. Never mount a damp filter into the ash cleaner!
 Never clean the device with water but use a damp cloth to remove dirt.
 Never use flammable or caustic products to clean the device.
 Please contact your local dealer when you need spare parts for this appliance. Always mention the specific
serial number, which is mentioned on the rating label of the device.
V. 03 – 16/08/2017
Leave the ashes to completely cool down prior to blowing them!
TC90400
WARNING
WARNING
5 ©Velleman nv