Télécharger Imprimer la page

Perel TC90400 Mode D'emploi page 4

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 11
Continuously check hoses and vacuum cleaner for heat while vacuuming ashes. If you notice a temperature
rise, switch off the vacuum cleaner immediately. Pull out the mains plug. Remove the vacuuming material
from the ash and dry vacuum cleaner. Allow device to cool down outside under supervision.
Completely empty the container before and after vacuuming ashes.
The use of dust collection bags is not permitted.
Immediately switch the appliance off or pull the power plug if foam forms or liquids escape!
Do not use abrasives, glass or universal cleaners! Never immerse the appliance in water. Certain materials
may produce explosive vapours or mixtures when agitated by the suction air! Never vacuum up the
following materials:
explosive or combustible gases, liquids and dust particles (reactive dust particles)
o
reactive metal dust particles (such as aluminium, magnesium, zinc) in combination with highly alkaline
o
or acidic detergents
undiluted, strong acids and alkalies
o
organic solvents (such as petrol, paint thinners, acetone, heating oil)
o
hot, burning or smoldering objects with temperatures higher than 40 °C. Temperatures above 40 °C
o
represent a fire hazard.
Not suitable to separate health-hazardous dust (dust classes L, M, H). In addition, these substances may
cause the appliance materials to corrode.
3.
General Guidelines
Refer to the Velleman® Service and Quality Warranty on the last pages of this manual.
4.
Packaging
Always check for transport damages after unpacking the device. Also, check if the accessories are included.
Please contact your local dealer when noticing damages or an incomplete device.
Never throw away the packaging carton. It could be necessary for storing the device or sending it back to
your dealer in case of damage (also refer to the warranty).
Caution! Always keep the packaging material on a safe place. Plastic bags and other packing materials
could be dangerous for children and animals.
5.
Features
Your ash cleaner has been designed to vacuum cold ashes of wood-burning stoves, fireplaces, barbecues...
HEPA filter included
blow function
caution: for cold ashes only
6.
Overview
Refer to the illustrations on page 2 of this manual.
1
handle
2
on-off button
3
suction connection
4
blowing connection
5
cover
7.
Assembly
Before using the ash cleaner, make sure all accessories are correctly fastened.
Unfasten the fixing clips and remove the cover from the ash collector.
Attach the filter to the lower part of the cover. Attach the included filter bag to the filter. The filter bag will
protect the filter.
Replace the cover on the ash collector and fasten the fixing clips.
Attach the aluminium suction nozzle to the flexible hose.
Attach the flexible hose to the ash collector.
V. 03 – 16/08/2017
TC90400
6
hose
7
ash collector
8
aluminium suction nozzle
9
filter
4
©Velleman nv

Publicité

loading