Tenovis Integral T 3 DSS-Link Notice D'installation page 12

Startup
Installing the DSS-link
-- On the T3 Comfort, close the display cover.
-- Turn the T3-telephone over. On the underside of the
telephone, there are one or two slots for inserting Tenovis
links. If you are using two links, select the outer slot 2 for
the DSS-link.
-- Disconnect ISDN-connection lead and all external network
devices (telephone disconnected from power supply).
-- Insert the catches on the link (on the tip of the wedge
shape) into the openings provided on the base of the
telephone (a).
-- Carefully press the link downwards into the slot (b).
-- Re-connect the telephone with the ISDN-connection lead
and start it up.
-- After an automatic test routine, the telephone is once
again ready to use and detects the inserted link.
On the I33/I55, the Comfort or Classic will also show a
message confirming which type of link has been started
up in which slot.
a
2
b