Lindy 42961 Manuel Utilisateur page 3

User Manual
Introduction
Thank you for purchasing the LINDY USB Audio Adapter. This adapter plugs into an available
USB port and adds multi channel audio to any PC. The additional extension cable allows you to
extend the Audio Adapter from the rear of the PC for easy access.
System Requirements
USB 1.0/2.0 port
Windows XP/Vista/7/8, Mac OS 9 & higher
Minimum 50MB Hard disk space
Minimum 128MB Memory (Windows XP)
Package Contents
USB Audio Adapter
0.2m USB Extension Cable
Driver CD
This User Manual
Installation
If you only intend to use the adapter for stereo audio and microphone then you can simply insert
the adapter into an available USB port to use the drivers built into your operating system. To use
the virtual surround sound feature please use the following instructions:
1. Plug the LINDY USB Audio Adapter into an available USB port and load the CD-Rom provided
into the CD drive
2. Run x:\setup.exe (x is your cd-drive)
3. Follow the on screen instructions to complete the installation of the driver software
4. At the appropriate prompt, click "OK" to reboot your computer
5. Once rebooted, the USB Audio icon will appear on your taskbar and also within the control
panel. Open the "CMI USB Sound config" within the control panel to change the audio settings
Windows 8:
Copy the contents of this disk to your PC or alternatively download the latest driver from
www.LINDY.com
1. Extract the .zip using your preferred method, leaving the extracted files in its own folder.
2. Right click on setup.exe then select Properties and then select the Compatibility tab.
3. Tick the Compatibility mode box and select Windows 7, and then click Apply.
4. Click Ok on the windows which open prompting you to insert the USB Audio Device.
5. Insert the LINDY USB Audio Adapter.
6. Run the setup.exe file as normal, the USB PnP Sound Device Driver will be installed.
7. A reboot is needed once the setup is finished.
8. You will now see the usual USB Audio Control Panel in your system tray.
To uninstall, go to "Device Manager" in the control panel and right click on "CMI USB Sound
Device". Select uninstall and follow the on screen instructions.
English