Handicare EasySlide SystemRoMedic 1420 Manuel D'utilisation page 4

English
Placement of EasySlide
The EasySlide is placed with the locking clasps facing upward and towards the head of the bed. Place a sheet over the
EasySlide and fold it in under the mattress on both sides of the bed for transfers to/from the bed and for repositioning.
Using EasySlide
Note
Material
Polyester, microfibre, polyamide
Care of the product
Read the product label.
Do not use rinse/ fabric softener and avoid
tumbler-drying for optimal service life.
4
Tighten the straps before the bed backrest is raised. Loosen the straps when the
backrest is lowered.
Be aware that there is a risk of the user sliding out of bed. Always raise the bed side rails when the
user is unattended.
Turn the user by pulling on the bed sheet that covers the EasySlide.
When turning is complete, tuck the sheet in on both sides.
Medical Device Class I
Medical Device Class I. The product complies with the
requirements of the Medical Devices Directive 93/42/EEC.
Contact your local distributor if you have any questions
about the product and its use. See www.handicare.com for
a complete list of distributors.
Expected lifetime
Up to 10 years of normal use
SystemRoMedic
M A N U A L
TM