Publicité
Les langues disponibles
Les langues disponibles
Thank you!
Thank you for choosing this EUROM hose reel – you have made a good choice!
In order to enjoy problem-free use of your reel in the long term we strongly recommend that you
carefully read the instruction manual completely in advance: it contains important information on
the installation, use and maintenance of the device.
We wish you a great deal of problem-free and enjoyable use!
1. Introduction
The EUROM Easywinder hose reel is intended for household use such as the spraying of
gardens, car washing, etc. You must therefore not use it for other purposes.
The hose on the EUROM Easywinder is 30+2 meter x ½" (12,5 mm.)
2. Description
1. Easywinder hose reel
2. Hose holder
3. Hose reel ring
4. Hose reel screw
5. Wheel (2x)
6. Wheel ring (2x)
7. Split pin wheel (2x)
8. Wheel cap
9. Supply hose
10. Foot pedal
11. Button for turning mechanism
12. Water inlet
13. Spray head
14. Stopper ball
3. Installation
Remove all packaging material.
1. Slide the metal tubes off the foot pedal into the tubes on the hose reel until they click into
place and the locking pins spring up (see diagram). Pull hard to ensure that they are secure.
2. Secure the hose holder with the ring and screw on the plastic plate on the push-bracket.
First slide the wheel and then the ring over the axle, insert the split pin into the hole in the
3.
axle and bend the end of the split pin to secure. Place the wheel cap on the wheel. Repeat
with the other wheel.
8
EN
Publicité
