Options - AEG FSE63600P Notice D'utilisation

Masquer les pouces Voir aussi pour FSE63600P:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

3. Press on/off to confirm the setting.

7. OPTIONS

Desired options must be
activated every time before
you start a programme.
It is not possible to activate
or deactivate options while a
programme is running.
Not all options are
compatible with each other.
If you select non compatible
options, the appliance
automatically deactivates
one or more of them. Only
the indicators of the still
active options are on.
7.1 XtraDry
Activate this option to boost the drying
performance. With XtraDry on, the
duration of some programmes, water
consumption and the last rinse
temperature can be affected.
XtraDry is a permanent option for all
programmes other than
need not to be selected at every cycle.
In the other programmes the setting of
XtraDry is permanent and it is
automatically used in next cycles. This
configuration can be changed at any
time.
Every time
activated, XtraDry is off and
needs to be chosen
manually.
Activating XtraDry deactivates TimeSaver
and vice versa.
How to activate XtraDry
Press
. The related indicator is on.
The display shows the updated
programme duration.
7.2 TimeSaver
The TimeSaver allows to reduce the
duration of a selected programme by
approximately 50%.
The washing results are the same as with
the normal programme duration. The
drying results can decrease.
This option increases the pressure and
the temperature of the water. The
washing and the drying phases are
shorter.
By default, TimeSaver is off, but it is
possible to activate it manually. This
option cannot be combined with
XtraDry.
How to activate TimeSaver
Press
If the option is not applicable to the
programme, the related indicator is off
or it flashes quickly for a few seconds and
then goes off.
The display shows the updated
and
programme duration.
7.3 ExtraHygiene
This option provides better hygiene
results by keeping the temperature at 70
°C for at least 10 minutes during the last
rinsing phase.
is
How to activate ExtraHygiene
Press
If the option is not applicable to the
programme, the related indicator does
not come on or it flashes quickly for a
few seconds and then goes out.
The display shows the updated
programme duration.
ENGLISH
. The related indicator is on.
, the related indicator comes on
35

Publicité

Table des Matières
loading

Table des Matières