Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
USER GUIDE
Using Symphonix
The first time you use RCA Symphonix, you'll
need to find the most comfortable fit for your ear
and for the environments where you plan to use
the earpiece. First of all, you should make sure the
correct tube is in for the ear you want to wear the
RCA Symphonix earpiece on.
Find the correct tube for your ear
The RCA Symphonix earpiece comes from
the factory with the tube for the right ear attached.
If you plan to use the earpiece on your right ear,
great...the earpiece is ready for you to use.
If you plan to use the earpiece on your left ear,
you'll need to take the tube for the right ear off
the earpiece and replace it with the other tube
included in your package, the one for the left ear.
To change the tube:
1.
Find the part of the
tube that attaches to
the earpiece. Gently
rotate this section of
the tube so that the
sound inlet is exposed
(as shown here).
2.
Pull the tube straight
off the earpiece.
IMPORTANT: DO NOT pull the tube off
at an angle. Doing so could harm the tube
connector or the components in your
earpiece and void your warranty.
3.
Once you've removed
the tube completely,
use your thumb to
gently pry the dome
from the end of the
tube.
4.
Find the other tube that came in the package.
Attach the dome to the end of this tube by
pushing the opening on the back of the dome
gently onto the end of the tube. Push the
dome onto the end of the tube as far as it will
go. Make sure the dome is securely fastened.
6
Sound inlet
Dome
5.
Before you attach the tube to the earpiece,
make sure the exposed part of the earpiece
is clean of dust or other particles. Use a small
brush to clean if necessary.
6.
Find the part of the
tube that connects to
the earpiece (shown
here).
7.
Place the hole on
the bottom of tube
connector over the
post on the top of
the earpiece (shown
here). Turn the tube
sideways on the top
of the earpiece and
push straight down to
attach the tube to the
earpiece.
8.
Rotate the tube into
the correct position for
use with the earpiece.
Place Symphonix on your ear
1.
Put the earpiece body
behind your ear
2.
Insert the dome
in your ear gently.
Then gently wiggle the
dome into the ear canal
so that it is comfortably
in place.
3.
Fold the tail into the
bowl of your ear. The
tail will help stabilize the
earpiece on your ear
and keep the dome and
tube in place.
If you find that the tail is
too long to fit comfortably
in the bowl of your ear
as shown, you can use a
pair of scissors to trim
it to a size that works for
you.
Tube connector
Post
Earpiece
body
7
Publicité
Chapitres
Table des Matières
