Troubleshooting And Repair - Kamikaze KV 360 Guide De L'utilisateur

ELECTRIC PRUNING SHEARS

21. TROUBLESHOOTING AND REPAIR

Have your power tool serviced by a qualified repair person using only identical
parts for replacement. This will ensure the safety of the power tool.
Problem
Battery out of charge
Pruner
Battery not connected
doesn't start
On / off switch failure
Loose internal connections
Intermittent
Operation
On / off switch failure
Blade dull
Blade gap
Hot Blades
Poor lubrication, resulting in
excessive friction
Lubrication is not in place,
resulting in excessive friction
Dirty blade
Poor Trimming
Blade dull
Performance
Trimming quality is poor
The battery is not fully
charged
The plug of the battery
charger is not inserted
correctly into the battery
Will not
The charger is not properly
charge.
connected to the socket
Charger red
Battery contact point is dirty
light flashes
Invalid battery
Battery charger is invalid
Possible Reason
85
www.kamikazevolpi.com
Corrective Action
Charge Battery
Connect battery
Send to repair service center
Send to repair service center
Sharpen or replace the blade
Sharpen or replace the blade
Lubricate blade
Lubricate blade
Clean blade
Sharpen or replace the blade
Read the instructions carefully
harge the battery
C
Insert the plug correctly
Connect it correctly
Clean the battery contacts
Replace battery
Replace Battery Charger