Using The Thermostat - CHICAGO AJ55C-LED Manuel D'utilisation

If inserted incorrectly or if the batteries are not replaced at the same
time or when disposed of in a fire or when an attempt is made
to charge a battery not intended to be recharged this may cause
dangerous situations.
Remove the batteries when you dispose of the
appliance. Used batteries must not be disposed of as
household refuse. Take them to your appliance retailer
or to a special collection point for disposal.

Using the thermostat

Note: Your electric fireplace insert is equipped with a thermostat. You
can therefore consistently maintain a preset room temperature by me-
ans of automatic on and off switching.
• Turn the thermostat control 10 in the direction of rotation or until
you hear a clicking sound.
Note: The clicking sound signalises the current room temperature.
• Set the switch for the first heating stage 8 to position I if you would
like a low supply of heat. Set the switches for the first 8 and se-
cond heating stages 7 to positions I and II if you would like a high
supply of heat.
• Now turn the thermostat control 10 in the direction of rotation until
you reach the desired room temperature.
• Now the heating function begins automatically.
ATTENTION! DANGER OF BURNING!
Please observe that the surfaces which
radiate heat can achieve temperatures
exceeding 50 °C. Make sure that the unit is switched
off and cooled off before you touch it.
ATTENTION! Please make sure that the unit is not
covered with towels, curtains or similar objects.
Otherwise there is danger of overheating. Therefore,
15