Geberit 968.338.00.0 00 Instructions De Montage page 13

Explanation of symbols
1 First indicator on display
2 Second indicator on display
3 Third indicator on display
4 Fourth indicator on display
5 <+> button
6 <Info> button
7 <-> button
Symbol Description
Room temperature
measurement
Outdoor temperature
measurement
Daytime temperature
Nighttime temperature
Frost protection temperature
Room heating
Room cooling
Data and settings menu
18014402232365835-1 © 03-2018
968.338.00.0 (00)
Commissioning
Pairing room thermostats and
heating zones
One or more heating zones must be paired
to each Geberit room thermostat. This
applies to both wired and wireless room
thermostats.
1
Press and hold the <OK> button on
the Geberit main control unit for
2 seconds.
2
Press the <▷> button.
3
Press the <OK> button.
✓ The [PAIRING] and [ZONE 1]
LEDs flash.
4
On the Geberit room thermostat you
wish to select for heating zone 1,
press and hold the <+> and <->
buttons simultaneously for
2 seconds.
✓ [PAIr] is displayed on the room
thermostat.
✓ Following successful pairing, the
number of the paired heating
zone is displayed for 3 seconds
(e.g. [ZonE 1]).
✓ The [PAIRING] and [ZONE 2]
LEDs flash on the Geberit main
control unit.
5
On the Geberit room thermostat you
wish to select for heating zone 2,
press and hold the <+> and <->
buttons simultaneously for
2 seconds.
✓ [PAIr] is displayed on the room
thermostat.
✓ Following successful pairing, the
number of the paired heating
zone is displayed for 3 seconds.
✓ The [PAIRING] and [ZONE 3]
LEDs flash on the Geberit main
control unit.
EN
13