Indel Webasto Marine Isotherm VE150 Instructions Pour L'installation Et L'utilisation page 23

VE150 Cooling Unit
Problems
The Cooling Unit
does not start -
the Unit worked
Faulty electronic Unit
the system, no cool at
The Cooling Unit
works for few
seconds - the Unit
worked
The Cooling Unit
works but it is not
cooling -
The Unit is new
The Cooling Unit
The cabinet is too big Check the cabinet
keeps working
stalled on the evapo-
Reasons
The main supply
voltage is too low
Check the voltage
Thermostat
Everything is well Power consump-
installed, gas inside
creased, constant
all (rare case)
compare it to the
maximum cooling
Is the correct unit
Thermostat not in- Check if the probe
is installed on the
rator or installed in
the wrong position it is in a different
Humidity inside the
cabinet inside the cabinet
by passing through
hole through the
over evaporator
Possible Issue /
Check
Electrical Check the wire
connection
The wires are
oxidized
Thermostat is
broken!
Replace the com-
tion greatly in-
pressure in the
system
You have wrong cool-
dimension and
capacity of the
unit.
installed in the
cabinet?
Place the probe in the
appropriate socket
evaporator or if
socket
Humidity gets Find where humidity
gets inside from.
gasket or pipes
cabinet.
Ice presence all
Solution
connection
pressor
ing unit!!!
Notes
23