Rugged Ram ® Mount Instructions - Garmin Rugged RAM Instructions D'utilisation

Rugged RAM
Instructions
WARnIng

See the Important Safety and Product
Information in the Montana
before installing the motorcycle mount.
notice
Incorrectly wiring the power/audio
cable with bare wire leads can result
in damage to the vehicle or the battery.
Garmin strongly recommends having
an experienced installer with the proper
knowledge of electrical systems install
the mount.
Limited Warranty
Garmin's standard limited warranty
applies to this accessory. For more
information, see the Important Safety
and Product Information in the Montana
product box.
2
Mount
®
product box
™
Connecting Power to the
Mount
notice
If any wire is left unconnected, insulate
the wire and safely secure it on your
vehicle.
1. Select a location to mount the
Montana on your vehicle, based on
available power sources, safe cable
routing, and that the driver view is
not obstructed.
2. Connect the red and black
your vehicle's main power (10 to 50
Volts).
3. If necessary, connect the serial data
wires to your vehicle.
• Yellow is the serial data input
wire.
• Blue is the serial data output wire.
• Green is the serial ground wire.
wires to
➊
➋
➊