Troubleshooting - Esoteric D-05 Manuel Du Propriétaire

Troubleshooting

In case you experience any problem with this unit, please take
the time to look through this chart and see if you can solve the
problem yourself before you call your dealer.
No power
e Check the connection to the AC power supply. Check and
make sure the AC source is not a switched outlet and that,
if it is, the switch is turned on. Make sure there is power to
the AC outlet by plugging another item such as a lamp or
fan.
e Press the POWER switch of the main unit to turn it on.
No sound
e Check amplifier and digital device connections.
Input indicator flashes.
e Turn the device connected to the selected input terminal on.
e Check whether the connection to the selected input
terminal is correct.
A beeping noise occurs at regular intervals.
e The D-05 is in Word sync mode, but the connected device is
not. Check the connection to the Word sync terminal and
the setup of the connected device.
This phenomenon occurs when the error detected is below
the limit of detection for the D-05 word error that would
normally produce a WRD ERROR.
The WORD indicator flashes.
e The Word sync mode is selected, but there is no clock
source. Turn the Word sync mode off.
e An incompatible signal is input. Check Word sync
connections and the setup of the connected devices.
The display shows "NO WORD!"
e No word clock is being received. Check connections to the
external master clock generator, its power supply and
output status.
e The Word sync mode is selected, but there is no clock
source. Turn the Word sync mode off.
The display shows "WRD ERROR!".
e An incompatible signal is input. Check Word sync
connections and the settings made on connected devices.
e When a device without a Word sync function is used, use
the WORD button on the unit to turn off the Word sync
function.
The display shows "WRD UNLCK!".
e Connect a clock generator whose output frequency
precision is within ±15 ppm.
If normal operation cannot be obtained, unplug the power
cord from the outlet and plug it again. This resets the
internal micro-computer which can be disturbed during
electrical storms, power interruptions, et cetera.
For European customers
Disposal of your old appliance
1. When this crossed-out wheeled bin symbol is
attached to a product it means the product is
covered by the European Directive
2002/96/EC.
2. All electrical and electronic products should be disposed of
separately from the municipal waste stream via designated
collection facilities appointed by the government or the
local authorities.
3. The correct disposal of your old appliance will help prevent
potential negative consequences for the environment and
human health.
4. For more detailed information about disposal of your old
appliance, please contact your city office, waste disposal
service or the shop where you purchased the product.
15