Specifications; Electrical Diagram - Sunbeam 168 Manuel D'utilisation

SPECIFICATIONS

NO. 0168
Power supply:
Hot water heater power consumption:
Refrigeration compressor power consumption:
Refrigerant type:
Refrigerant quantity:
Cold water cooling capability:
Hot water heater capability:
Cooling compatment cooling temperature:
Volume of cooling compartment:
Net weight:
Dimensions:
N OT E : UL model number on the back of the unit re f e rs to Sunbeam Water Dispenser with Cooling Compartment

ELECTRICAL DIAGRAM

1. Protection diode for the LED indicator light
2. Cooling on LED indicator light
3. Diode for the LED indicator light
4. Resistor for the LED indicator light
5. Refrigeration thermostat for the cold water
6. PTC starter for the compressor
7. Refrigeration Compressor
8. Refrigeration thermostat for the fridge
9. Thermal protector for the refrigeration compressor
10. Protection diode for the LED indicator light
11. Heater on LED indicator light
12. Diode for the L E D indicator light
13. Resistor for the L E D indicator light
14. Heating power - digitally controlled switch
15. Thermostat for the hot water (85 degrees Celsius)
16. Heater
17. Auto-reset thermostat for the hot water (95 degrees Celsius)
18. Protection diode for the LED indicator light
No. 0168/0169
AC 115V / 60 Hz / 7A
4.5 Amperes
2.5 Amperes
R-134a
65 + / - 1 Gram / 2.3 oz.
2L / 67.6 fl.oz. / hour (at room temp. below 30°C/86°F cools down to 10°C/50°F)
5L / 169.1fl.oz. / hour (at room temp. above 20°C/68°F heats up to 90°C/194°F)
0°C - 10°C / 32°F - 50°F
0.60 cu.ft. / 17 L
51 lbs / 23.13 Kg
13" x 16" x 37.5" (33.02 x 40.64 x 95.25 cm)
19. Power on LED indicator light
20. Diode for the L E D indicator light
21. Resistor for the L E D indicator light
- 8 -