Optional Accessories - Sony VPL-HS10 Mode D'emploi

DVI (TMDS)
PJ MULTI
"Memory Stick"
General
Dimensions
Mass
Power requirements
Power consumption
Operating temperature
Operating humidity
Storage temperature
Storage humidity 10% to 90%
Supplied accessories
56
Specifications
GB
Digital RGB
32-pin multi connector
Composite video: 1 Vp-p±2 dB sync
negative (75 ohms terminated)
S video: Y/C
Y (luminance): 1 Vp-p±2 dB sync
negative (75 ohms terminated)
C (chrominance): burst 0.286
Vp-p±2 dB (NTSC) (75 ohms
terminated)
burst 0.3 Vp-p±2 dB (PAL) (75
ohms terminated)
Analog RGB/component:
R/C (P ): 0.7 Vp-p±2 dB
R R
(75 ohms terminated)
G: 0.7 Vp-p±2 dB
(75 ohms terminated)
G with sync/Y: 1 Vp-p±2 dB sync
negative (75 ohms terminated)
B/C (P ): 0.7 Vp-p±2 dB
B B
(75 ohms terminated)
SYNC/HD: Composite sync input:
1–5 Vp-p high impedance, positive/
negative
Horizontal sync input: 1–5 Vp-p
high impedance, positive/negative
VD: Vertical sync input: 1–5
Vp-p high impedance, positive/
negative
Slot 1
× ×
345 148 369 mm
× ×
5 7 5
(13 / 5 / 14 / inches) (w/
8 8 8
h/d)
Approx. 5.4 kg (11 lb 14 oz)
AC 100 to 240 V, 2.9–1.1 A,
50/60 Hz
Max. 260 W
(Standby mode: 5 W)
0ºC to 35ºC (32ºF to 95ºF)
35% to 85% (no condensation)
–20ºC to 60ºC (–4ºF to 140ºF)
Remote control RM-PJHS10 (1)
Size AA (R6) batteries (2)
Signal interface cable SIC-HS41
(10 m) (1)
AC power cord (1)
Air filter (for replacement) (1)
Cinema Filter (1)
Operating Instructions (1)
Design and specifications are subject to change
without notice.

Optional accessories

Signal interface unit IFU-HS1
Projector Lamp LMP-H180 (for replacement)
Air filter PK-HS10FL (for replacement)
Signal interface cables SIC-HS10/SIC-HS20/SIC-HS30/
SIC-HS40
Projection lens Short Focused Conversion Lens
VPLL-CW10
Long Focused Conversion Lens
VPLL-CT10
Projector Suspension Support PSS-610
Projection Distances for a 720p
format signal, computer's signal, etc.
Screen
d
c
b
a
Projector
12˚
f f
12˚
e