Specifications - Sony VPL-HS10 Mode D'emploi

2 Open the filter cover while pushing the
filter lock knobs inward.
3 Remove the air filter from the projector by
holding the tab on the filter cover.
4 Insert the new air filter into the projector.
5 Replace the filter cover.

Specifications

System
Projection system
3 LCD panels, 1 lens, projection
system
LCD panel 0.87-inch TFT LCD panel, 3,276,504
pixels (1,092,168 pixels × 3)
Lens 1.3 times zoom lens (powered)
f33.6 - 42 mm/F1.85 - 2.2
Lamp 180 W UHP type
Projection picture size
Range: 40 to 300 inches (measured
diagonally)
Color system NTSC
3.58
PAL-M/PAL-N system, switched
automatically/manually
Acceptable video signals
15 kHz RGB/component 50/60 Hz,
Progressive component 50/60 Hz,
DTV (480/60i, 575/50i, 480/60p,
575/50p, 720/60p, 720/50p, 1080/
60i, 1080/50i), 1080/24PsF,
Composite video, Y/C video
Acceptable computer signals
fH: 19 to 72 kHz
fV: 48 to 92 Hz
Maximum resolution XGA 1024
768, fV: 85 Hz
Speaker 33 mm (1
max. 2 W
using a "Memory Stick")
Input/Output
Video input VIDEO: phono type
Composite video: 1 Vp-p±2 dB
sync negative (75 ohms terminated)
S VIDEO: Y/C mini DIN 4-pin type
(male)
Y (luminance): 1 Vp-p±2 dB sync
negative (75 ohms terminated)
C (chrominance): burst 0.286 Vp-p
±2 dB (NTSC)
(75 ohms terminated)
burst 0.3 Vp-p±2 dB (PAL)
(75 ohms terminated)
Y/P /C /P /C Component: phono type
B B R R
G with Sync/Y: 1 Vp-p±2dB sync
negative (75 ohms terminated)
B/C /P
B
(75 ohms terminated)
R/C /P
R
(75 ohms terminated)
/PAL/SECAM/NTSC /
4.43
×
5
/ inches) diameter,
16
×
2 (available only for
: 0.7 Vp-p±2dB positive
B
: 0.7 Vp-p±2 dB positive
R
Specifications
55
GB