Publicité
Les langues disponibles
Les langues disponibles
It is not intended for the use by guests in hotels, motels, and
other residential facilities.
It may only be used in the manner described in this instruc-
tion manual. You may not use the appliance for commercial
purposes.
Any other use is considered to be improper and can lead to
material damages and even personal injuries.
The manufacturer will not assume any liability for damages that
arise due to improper use.
Scope of Supply
Housing
Condensate collection tray (detachable)
Steam outlet in the lid (detachable)
Rice pot
Steam insert
Line cord
Measuring cup
Spoon
How to use
CAUTION:
The appliance is not suitable for the preparation of rice pud-
ding. Milk could boil over or burn.
Lid
Press the button in the handle of the lid to open the appliance.
Condensate collection tray
The condensate collection tray is located below the fastening of
the lid. The condensate will accumulate there, when you open
the lid.
Measuring cup
The measuring cup (CUP) in combination with the water level
indicator in the rice pot helps determine the amount of water
and rice.
For example, if you wish to cook 6 CUPs of rice, add 6 measur-
ing cups of rice to the pot and fill with water to the respective
(CUP) mark, e.g. 6.
Rice Quantity
•
With this device you can boil a maximum of 1.3 kg of
rice (gross weight). For this you require 3 litres of water.
Depending on the type of rice, this will provide you with
approximately 3.3 kg of boiled rice with a cooking time of
approx. 45 min.
•
The minimum quantity of rice for boiling is 280 g (2 CUPs),
which will provide you with approx. 550 g of boiled rice,
depending on the type of rice used.
•
If the measuring cup is not at hand, please use a rice-to-
water ratio of 1 : 2 (1 part rice : 2 parts water).
ON / OFF switch
•
When the ON / OFF switch is in the ON position, the appli-
ance is operational. The control light POWER lights.
•
The appliance is turned off when in the OFF position.
The control light POWER goes off.
Function Switch
•
When the function switch is switched towards the top, the
appliance will stay in the operational condition "Keeping
warm". The indicator lamp WARM is lit.
•
With the function switch you can change over to the mode
"Cooking". This is only possible if the rice pot is correctly
inserted and the switching contact (in the middle of the
hot plate) therefore properly connected.The indicator lamp
COOK is lit.
Cooking time
•
Once the water has fully evaporated in the rice pot, the ap-
pliance switches automatically to "Keeping warm", ending
the cooking process. The indicator lamp WARM is lit.
Ending operation
Observe the following sequence:
1. Check if the indicator lamp WARM is lit. Push the function
switch upwards, if applicable.
2. Set the power switch to the OFF position. The indicator
lamp POWER goes off.
3. Disconnect the power plug from the outlet.
Spoon holder
A bracket is located on the side of the casing. You can hang up
the included rice spoon there.
Before Initial Use
•
Remove the packaging.
•
Check the scope of delivery.
•
We recommend cleaning the appliance as described under
"Cleaning".
Initial Operation
•
Ensure that the ON / OFF switch is in the OFF position and
that the function switch is set to "Keeping warm".
•
Insert the plug of the connection cable into the appliance
first.
Electrical Connection
•
Before inserting the plug into the socket. Make sure that
the mains voltage to be used matches that of the device.
You can find this information on the nameplate.
•
Connect the device to a duly installed protective contact
socket.
27
Publicité
