Electrical Connections - Indel Webasto Marine Divino The One Instructions Pour L'installation Et L'utilisation

11 Electrical connections

Connection to the electrical mains can be made for Divino The One
operation.
An even better solution is installing a transformer, an optional acces-
sory, which switches automatically from battery power to electrical
power when the latter is connected.
• Before turning on the appliance, check to make sure that the
voltage of the electrical system and/or battery complies with
that which is indicated on the unit's data plate.
• Connect the refrigerator directly to the battery or to the relative
main switch and make sure that the system is equipped with an
electric device that's capable of protecting the circuit against
possible overcurrents.
• If the power supply voltage is different from 12Vdc, install a ΔI
0.03A differential circuit breaker. Avoid connecting the unit via
the vehicle's control panel as this could result in voltage drops.
• Insert a fuse upstream from the refrigerator (see the table
below). Connect the red wire to the electrical system's positive
terminal, and connect the black wire the negative terminal. Use
a pressed lug terminal that's suitable for the cable's size.
• A separate switch that simultaneously disconnects the power
cables must be installed upstream from the refrigerator.
Check to make sure that the installed switch supports the
corresponding load indicated in the table below.
Model
Divino The One
24
User Manual
12Vdc
15A