Design Allowances; Minimum Allowances - Indel Webasto Marine Divino The One Instructions Pour L'installation Et L'utilisation

User Manual

8 Design Allowances

Integrating Divino The One on board is incredibly easy. All you need
is the specification of a hole, a power supply and ventilation.

8.1 Minimum allowances

Ensure that the void has a minimum internal height of 400mm and
the hole is at least 40mm away from the internal walls.
If installing multiple The Ones into one void, ensure that the centre
points of each hole are 200mm apart (48mm distance from edge of
one The One crown to the next).
19