Hole Specification - Indel Webasto Marine Divino The One Instructions Pour L'installation Et L'utilisation

8.2 Hole specification

A 154mm hole can be created using:
• CNC / water jet cutting
• A standard 152mm hole saw
Achieve the perfect on board installation and the greatest perfor-
mances as follows:
1. Install in a dry suitable place, screened from water splash, chlo-
rinated water, sun, salt and heat coming from other devices.
2. Ventilation: minimum ventilation requirements must be re-
spected.
3. Power supply: 12V DC. (Installed power, cable section, recom-
mended fuse).
20
Countertop thickness:
1mm - 65mm
User Manual