Publicité
Les langues disponibles
Les langues disponibles
Telephone Helpline 0845 146 2887
Safety Tips
•
Position on a flat, stable surface.
•
A service agent/qualified technician should carry out installation and any repairs if required. Do not remove any
components on this product.
•
Consult Local and National Standards to comply with the following:
Health and Safety at Work Legislation
o
BS EN Codes of Practice
o
•
Keep all packaging away from children. Dispose of the packaging in accordance to the regulations of local
authorities.
•
Can rims must be straight before using with this product - it may be necessary to straighten the rim with a pair
of pliers
•
Regularly check the can opener for wear (damaged or worn blades can cause fragmentation of can lids which
may enter the can contents)
•
Always ensure that the can opener clamp and platform are securely attached to the work surface
Product Description
CE038 – Rotary Can Opener
CE039 – Rotary Can Opener
Introduction
Please take a few moments to carefully read through this manual. Correct maintenance and operation of this appliance
will provide the best possible performance from your VOGUE product.
Pack Contents
Rotary Can Opener
Assembly
1.
Attach the clamp to a sturdy work surface
2.
Ensure that there is room on the work surface for the can to be rotated
3.
For permanent attachment the platform of the clamp should be screwed to the work surface (
4.
Slide the post of the can opener through the opening of the clamp platform, with the blade assembly facing the work
figure 2
surface (
)
Figure 1
Table Clamp & platform
Figure 2
figure 1
)
3
Publicité
