Assembly; Use; Repair, Maintenance And Storage; Disposal - brennenstuhl MB 110 Instructions D'utilisation Et Consignes De Sécurité

... / Assembly / Use / Repair, Maintenance and Storage / Disposal / Information
Verify the work pieces/sheet will not
O
move on the top
secure in place.
Make sure that you do not load
O
workpieces unevenly. Otherwise, the
workpiece can become unbalanced
and fall down.
Remove any excess materials on the workbench,
O
e.g. wet paint, dirt, oil or snow.

Assembly

Assemble the steel trestle as shown in
i
illustration „B".

Use

The set-up notices apply to figure „A".
Fold the legs all the way apart.
2
i
CAUTION! RISK OF INJURY!
i
Be sure the leg locks
in place. This will ensure stability.
Verify the safety devices are positioned cor-
i
rectly.
Place the work piece you will be working on
i
on the top .
1
Note: Use 2 trestles when working on long
work pieces.
14 GB
0489412_Stahl-Arbeitsbock_Content_EU.indd 14
. If necessary,
1
i
i
i
The packaging is made entirely of recyclable
materials, which you may dispose of at your local
recycling facilities.
Details of current options for disposing of electrical
appliances after their useful life can be obtained
are secured from your local or city council.
3
q
This device is guaranteed for 2 years from the pur-
chase date. This applies only to the initial purchaser
and is not transferrable. Please keep the receipt as
documentation. The guarantee applies only to ma-
terial or manufacturing defects and does not apply
to regular wear or damage caused by improper use.
In the case of third party culpability, the guarantee
is void.
CAUTION! Ensure the work pieces will not
move on the top .
1
Push the legs together again when you are
2
finished using the trestle.
Repair, Maintenance
and Storage
Repairs and maintenance to the trestle should
be performed by a competent person.
Store the workbench in a dry, closed room if
you are not going to use it for a protracted
period.

Disposal

Information

Guarantee

07.09.17 14:00