Uberhaus 38115136 Guide De L'utilisateur page 8

Fig. 1: Secure the fence (I5) to
the panel with bolts (AA) and
flat washers (BB).
Fig. 3: Insert the short beam 1
/ long beam 2 (K1) / (K4) into
the connection hole in short
beam 2 / long beam 1 (K2) /
(K3) and tighten with bolts
(CC), flat washers (BB) and
nuts (DD).
Fig. 2: Connect the big panel 1 (I1) and the small panel
1 (I3) with bolt (EE), flat washer (BB). Repeat this step
for big panel 2 (I2) and small panel 2 (I4).
Fig. 4: Attach the long beam 1 (short
beam 2) K3 (K2) / long beam 2 (short
beam 1) K4 (K1) to I1 (I4) / I3 (I2) with
bolts (FF), flat washers (BB), and
bolts (AA), flat washers BB.
Fig. 5: Secure the connector
(J1) to the beams with bolts
(AA) and flat washers (BB).