Uberhaus 38115136 Guide De L'utilisateur page 12

Fig. 20: Assemble the roof
piece 3 (O3) to the roof
piece 5 (O5). Repeat for
this step to assemble
cover 9 (P) and cover 3.
Fig. 24: Secure the roof
piece 10 (Q) to the beam
with bolts (II) and flat
washers (BB).
Hardware Pack 4
Part
JJ
KK
Fig. 21: Secure the roof
pieces (O5 and P) to the
top slanted beams (N1)
with screws (GG) and flat
washers (BB). Repeat this
step to secure the roof
piece 6 (O6).
Fig. 25: Put U1 onto the top of S5 (S6) and
tighten them with GG, BB. And then,
tighten U2 and the left side of R5 with GG,
BB. Lastly, tighten U3 and the right side of
R6 with GG and BB.
Description
Φ8 x 260mm Stake
Ring
Fig. 22: Assemble the
roof piece 1 (O1) to the
roof piece 3 (O3); repeat
for roof piece 4 (O4) and
roof piece 2 (O2). Use
screws (GG) and flat
washers (BB) to secure
to the top slanted beams
(N1).
Quantity
16 PCS
67 PCS
Fig. 23: Assemble the roof
piece 7 (O7) on the roof
piece 8 (O8); repeat for
roof piece 1 (O1) and roof
piece 3 (O3). Use screws
(GG) and flat washers
(BB) to secure to the top
slanted beams (N1).
Fig. 25-1: Secure t op cover
flap (U4) with bolts (AA) and
flat washers (BB).
Image