Thermal Cut-Out Reset; Emptying The Appliance; Cleaning, Care & Maintenance - Buffalo GL346 Mode D'emploi

UK
Approximate Temperature Guide:
Thermostat Setting

Thermal Cut-Out Reset

This appliance is fitted with a Thermal Cut-Out safety feature. Should the temperature exceed safe levels
the appliance will automatically cut power.
The Safety Cut-out switch is located on the underside of the appliance. To reset the appliance:
Empty the appliance and allow to cool.
1.
Press the reset button until it clicks.
2.
WARNING: Ensure the appliance has cooled down and is empty before resetting the
switch, as it may need to be tipped slightly to gain access to the switch.
The appliance is now reset and can be used as normal.
3.
Serving
Place a suitable vessel beneath the tap.
1.
Pull the tap towards you to begin pouring.
2.
Raise the tap handle to close the tap.
3.

Emptying the Appliance

Drain the appliance by using the tap to empty.
Cleaning, Care & Maintenance
• Always turn off and disconnect the appliance from the power supply before cleaning.
• Use soapy water and a damp cloth to clean the exterior of the appliance.
• Dry thoroughly after cleaning.
4
Off
1
2
3
4
5
HIGH
Approximate Temperature
39°C
50°C
62°C
76°C
90°C
100°C