To Lower The Saddle; To Fold The Pedals; To Fold The Handlebar Stem; To Fold The Main Frame - BIG Pelikaan 2014 Mode D'emploi

To lower the saddle

1. Open the seatpost quick-release and lower the saddle to its lowest position.
2. Close the quick-release to hold the seatpost in position (the seat makes an excellent
handle).

To fold the pedals

1. Push the end of the pedal directly inward, toward the crankset.
2. Fold the pedal over.
3. Repeat for the other pedal.

To fold the handlebar stem

1. Rotate the lever lock (1.6) away from the lower quick-release.
2. While holding the handlebar to prevent pinching, hold the cables out of the way, and
open the lower quick-release (Figure 1.6)
3. Fold the handlebar assembly to its down position

To fold the main frame

1. Open the latch lock.
2. Pull outwards, away from the frame, on the end of the frame latch until the latch opens.
3. While avoiding pinching yourself or cables, fold the bike in half (Figure 1.8)

To unfold frame

Reverse the steps of the folding procedure.

Adjustment

After unfolding the bike, if the frame or the stem is not rigid, the frame latch or lower stem
quick-release may need adjustment. If there is any motion at a latch and locked frame
hinge or stem, take your bike to your dealer for service.
WARNING
!
Riding a folding bike with movement at the lower stem quick-release or main frame
hinge could cause you to lose control and fall. If the folding frame moves at the stem or
frame hinge, take the bike to your service dealer for service.
Fig. 1.7
Fig. 1.8
– 19 –