Warranty - Haussmann Xpert PNT180 Manuel De L'utilisateur

PROBLEM
Housing heats during
use.
Severe air leakage.
(Slight air pressure is
normal, especially on
older tools.)
Follow all safety precautions whenever diagnosing or serving the tools. Disconnect air supply before
!
service.
TROUBLESHOOTING
POSSIBLE CAUSES
1. Incorrect lubrication or not
enough lubrication.
2. Worn parts.
1. Cross-threaded housing
components.
2. Loose housing.
3. Damaged valve or housing.
4. Dirty, worn or damaged
valve.

WARRANTY

Thank you for investing in a HAUSSMANN XPERT tool. These products have been
made to demanding, high-quality standards and are guaranteed for domestic use
against manufacturing faults for a period of 36 months from the date of purchase.
This guarantee does not affect your statutory rights. In case of any malfunction of your
tool (failure, missing part, etc.), please contact one of our service technicians at our toll
free service line at 1-866-206-0888 from 8 AM to 6 PM, Monday to Friday, Eastern
time. RONA reserves the right to repair or replace the defective tool, at its discretion.
The product is guaranteed for 36 months if used for normal trade purposes. Any
guarantee is invalid if the product has been overloaded or subject to neglect, improper
use or an attempted repair other than by an authorized agent. Heavy-duty, daily
professional or hire usage are not guaranteed. Due to continuous product
improvement, we reserve the right to change the product specification without prior
notice.
REGISTER YOUR PRODUCT
We invite you to register your product online to make future communications easier.
To do so, simply visit our website www.haussmanntools.com.
LIKELY SOLUTIONS
1. Lubricate using air tool oil according to directions.
2. Have qualified technician inspect internal mechanism
and replace parts as needs.
1. Check for incorrect alignment and uneven gaps. If
cross-threaded, disassemble and replace damaged
parts before use.
2. Tighten housing assembly, If housing cannot tighten
properly, internal parts may be misaligned.
3. Replace damaged components.
4. Clean or replace valve assembly.
23